Sand and Slurry Submersible Pumps
Description
These submersible pumps by Tsurumi Japan have been carefully designed to enhance performance with difficult fluids such as sand and silt laden waters. They are high power and offer exceptionally long operating life. Ideal for constructions sites and storm water pits and basements.
Single Phase Dirty Water and Slurry Tsurumi Pumps
These are known as contractor pumps as they typically find themselves used with professional trades in difficult situations. They are built tough and perform well on common single-phase power supplies. Tsurumi pumps are a Japanese design and are known across the world for their performance.
Dirty Water HS(Z) Series
This model has a spiral pump casing that allows sand and silt -laden water to pass through the pump. Additionally they have a shaft mounted agitator which prevents 'air lock' and also stirs the mixture helping the sediment to be removed.
Available in manual or automatic float switch operation to suit your preferences. These pumps have a aluminum alloy housing making them strong and long lasting. Easy to disassemble and maintain by the trades person.
- Max. solid handling 7mm
- 50mm side discharge port
- Semi-vortex Urethane rubber abrasion resistant impeller
- 10m cable with Australia plug end
- Flow rates up to 300 L/min
- Discharge heads to 18m
- Tsurumi anti-wicking cable entry design
- Thermal motor protection
- Twin dual SiC mechanical seals
- Japanese quality
Slurry HSD Series
Upgraded with a hi chrome impeller and agitator, this pump provides even longer wear life when pumping abrasive liquids. The cast iron casing results in an increased weight but an even more robust design. There is no float switch available for this pump as these pumps are typically used in industrial plants where other forms of level control are available to protect the pump for running dry.
HSD Series Pump Features:
- Solids up to 10mm
- 10m cable with Australian plug end
- Flow rates up to 220 L/min
- Discharge heads to 13m
- hi chrome impeller and agitator
- 50mm side discharge
- Tsurumi anti-wicking cable entry design
- Thermal motor protection
- Twin dual SiC mechanical seals
- Japanese quality
All Tsurumi pumps are fully serviceable with spare parts available off the shelf in Australia.
| Pump Specification | HS(Z)2.4S | HS(Z)2.75S | HSD2.55S |
|---|---|---|---|
| Voltage | 240V Single Phase | 240V Single Phase | 240V Single Phase |
| Power | 400 Watts | 750 Watts | 550 Watts |
| Motor | Continuous Duty Cycle when submerged | Continuous Duty Cycle when submerged | Continuous Duty Cycle when submerged |
| Level Control |
HS2.4S - Manual HSZ2.4S - Automatic - float switch |
HS2.75S - Manual HSZ2.75S - Automatic - float switch |
HSD2.55S - Manual |
| Flow Rate (max) | 207 L/min, 12.4 m3/hr | 300 L/min, 18 m3/hr | 220 L/min, 13 m3/hr |
| Discharge Head (max) | 12.2 m | 18 m | 13.2 m |
| Outlet | 50mm BSPF, 2" tail | 50mm BSPF, 2" tail | 50mm BSPF, 2" tail |
| Max. Fluid temp. | 60C | 60C | 60C |
| Compatabile Fluids |
Water Max. solid handling 7mm |
Water Max. solid handling 7mm |
Water Max. solid handling 10mm |
| Approx. Weight |
11.3 Kg |
18.2 Kg |
15 Kg |
| Approx Dimensions | 24 x 19 x 33 cm | 29 x 19 x 39 cm | 23 x 16 x 39 cm |
| Construction |
Semi vortex impeller (Urethane rubber) Oil resistant cable Anti-wicking cable entry Dual silicon carbide mechanical seals |
Semi vortex impeller (Urethane rubber) Oil resistant cable Anti-wicking cable entry Dual silicon carbide mechanical seals |
Semi vortex hi chrome impeller and agitator Oil resistant cable |
| Warranty | 1 yr | 1 yr | 1 yr |